Industrial Washers

Look at Eaton Fabricating when considering washers; technical expertise combined with state-of-the-art fabricationcapabilities will meet all your finishing needs.

Closed top design with conveyor located inside the housing, or open design utilizing brush seals>

Constructed of 14 gauge, 304 stainless steel or 3/16" thick carbon steel, double
welded and reinforced

Provided for the entire spray section of the washer. Completely welded and constructed of 14 gauge material.

Zone dividers

located at the entrance and exit of each spray zone, designed to reduce air currents and minimize cross contamination. Constructed of 14 gauge, 304 steel or 3/16" thick carbon steel.

Drain Decks

Located between spray zones. Fabricated of 3/16', 304 stainless steel or 1/4' thick carbon steel. Reinforced to provide a walkway through the drain areas. Welded in place and water tight.

Doors

Each drain section will have NEMA 12 style access doors with ladder. Door openings are framed and mounted to minimize leakage. 30" wide x 54' high or custom

Tanks

constructed of 3/16", 304 stainless steel or1/4" thick carbon steel. Seams double welded for water tight construction. Tanks are extended for easy access to pump mounting and screens. Tanks are supported on 3", 4", and 6" mild steel channel, sloped toward drain at approximately 1/4" per foot.

Site design by Bsalva.com, a Lorain County web design company